Exported from Streamline App (https://app.streamlineicons.com)Exported from Streamline App (https://app.streamlineicons.com)
Commercial information
  • +420 724 301 191
Technical information
  • +420 724 301 191
Orders, quotes, billing
  • +420 724 233 560
  • +420 606 710 721


is a cement bonded particleboard of thickness 12 and 14 mm and size 1250 x 625 mm provided with acrylic decorative mosaic plaster

Technical data sheet for download


CETRIS® DEKOR is a cement bonded particleboard of thickness 12 and 14 mm and size 1250 x 625 mm provided with acrylic decorative mosaic plaster.

CETRIS® DEKOR boards are supplied in shades according to colour table for CETRIS® DEKOR boards

In the case of bigger orders other thicknesses and formates of CETRIS® DEKOR boards can be agreed individually. The boards can be cut with circular saw with hard metal disc. For clean and straight cut a guide bar must be used and the boards must be cut on the reverse side to avoid damage to the face side. The cut edge must be provided with protective primer (supplied by the manufacturer). Hole pre-drilling is made with a drill without hammering function on a firm surface. A drill for metal is recommended for the board drilling. Drill from the face side only. The boards are mainly used as exterior facade cladding, for vertical cladding of base mouldings, facades, railing fills and soffits (under roof ceiling).

Technical specifications:

Basic size:1 250 x 625 mm
Board thickness:12 and 14 mm
Surface weight:th. 12 mm - 20 kg/m2 , th. 14 mm - 23 kg/m2
Service:according to customer requirements - cutting
Surface finish:decorative mosaic plaster in shades according to colour table for CETRIS® DEKOR boards
Technical data sheet for download

Suitable for systems:

Board identification CETRIS® DEKOR

Note: The colour card is for information only

Tloušťka desky
Kč / m2
12 --
14 --

Všechny uvedené ceny jsou bez DPH s odběrem ve výrobním závodě CETRIS Hranice. Dodací a platební podmínky se řídí Všeobecnými obchodními a dodacími podmínkami CIDEM Hranice, a. s. platnými pro rok 2023.

CETRIS® board properties

Cement bonded particleboards CETRIS® combine favourable features of cement and wood.

They are lighter than conventional cement-fibre boards, their strength and resistance against weather conditions, frost and mould ranks them higher than cement bonded chipboards or gypsum plasterboards.

    Board composition

  • 0%Wood
  • 0%Cement
  • 0%Water
  • 0%Hydration additives

CETRIS® boards are:

Fire resistant

CETRIS®cement bonded particleboards are fire resistant and their classification according to flame reaction pursuant to the European standard EN 13 501-1 is A2-s1, d0–non-flammable.

Environment friendly

CETRIS® cement bonded particleboards are ecological and environment friendly. They contain no hazardous substances such as asbestos and formaldehyde and they are resistant to petrol and oils.


CETRIS® cement bonded particleboards are frost resistant, tested successfully by 100 freezing-defrosting cycles pursuant to ČSN EN 1328 standard.

Weather resistant

CETRIS® cement bonded particleboards is the best material for wet rooms and weather-exposed exteriors for its excellent humidity resistance.

Hygienic harmless

CETRIS® boards are hygienic harmless, odourless and contain no hazardous substances.

Perfect sound barrier

CETRIS® boards provide for acoustic insulation (sound transmission loss 30 – 35 dB).

Fungi and mould resistant

Moulds are not formed on the board surface thanks to the CETRIS® board resistance to humidity.

Insect resistant

CETRIS® cement bonded particleboards are absolutely insect resistant thanks to their cement content.

Services and surface finish

Cement bonded CETRIS® particleboards can be processed by all commonly available wood processing machines. The professional treatment of boards requires tungsten carbide tipped tools. The boards may be cut, drilled, milled and grinded. The boards may be attached to structures by screwing, or riveting. Alternatively, CETRIS® board may be attached to a load-bearing structure by gluing or with clamps. Both methods are used, in particular, to attach boards in suspended vented facades - see Facade systems.

CETRIS® boards can be cut in lengthwise, lateral or crosswise direction according to the customer requirements. The boards are always cut from the basic production size of 3350x1250 mm using special equipment. Minimum possible dimensions of cut rectangular sizes are 50x50 mm. Maximum possible dimensions of cut rectangular sizes are 1225x3325 mm.

The boards can be delivered delivered with drilled holes, including countersinks, based on the drill plan submitted by the customer.

Full-size machine sanding is performed in the context of manufacture of floor boards CETRIS® PDB for the reason of reduction of thickness tolerance to +- 0.3 mm.

On customer's request we provide side edge of CETRIS® cement bonded particleboards with milling of semi-tongue, groove and tongue or chamfered edge.

Application of surface finish on CETRIS® cement bonded particleboards must respect principles laid down in the relevant technical and assembly procedures. For recommended materials and principles of application please visit here.

Detailed information:

can be downloaded in PDF format.

Download information

Regulation for surface finish applications:

Download information

Packaging, storage, handling and parameters of dispatched CETRIS boards®

CETRIS® cement bonded particleboards are placed on wooden transport pallets for forklift handling. The boards are fixed to the platform using a banding in a crosswise manner; longitudinal banding is possible upon the customer's request.

The boards are protected against weather conditions with a PE foil packaging. This packaging type does not meet conditions for long-term weather exposure by open-air storage.
CETRIS® cement bonded particleboards should be stored in roofed, dry space to prevent moisture absorption by the boards before installation in the building structure. 

When storing boards without surface finish pallets of the same size can be stacked. Pallets with boards with surface finish cannot be stacked.

CETRIS® boards should be placed on a pallet for handling. If stored differently the boards should be handled vertically. Also manual transport should be carried out with the boards in vertical position.

Detailed information:

can be downloaded in PDF format.

Download information

Board dealers

Looking for our boards? Not knowing where to buy them? Find the nearest dealer.

Information and training courses

Needing more information about our boards? Try our training course or call us.