Exported from Streamline App (https://app.streamlineicons.com)Exported from Streamline App (https://app.streamlineicons.com)
Commercial information
  • +420 724 301 191
Technical information
  • +420 724 301 191
Orders, quotes, billing
  • +420 724 233 560
  • +420 606 710 721

CETRIS® FINISH

is a cement bonded particleboard with smooth surface provided with a primer and a final top coat

Technical data sheet for download

CETRIS® FINISH

CETRIS® FINISH is a cement bonded particleboard of thickness 10 - 16 mm with smooth surface provided with a primer and a final top coat in shades pursuant to colour tables RAL, NCS.

Vhodnost barevného odstínu konzultujte s výrobcem

The reverse side of CETRIS® FINISH cement bonded particleboards is provided with a protective primer with irregular texture and appearance and insufficient coverage. The colour shade of the coat is not specific, therefore the requirement for a white or transparent shade needs to be specified in the order in advance.

Technical specifications:

Basic size:3 350 x 1 250 mm
Board thickness:10-12-14-16 mm
Bulk density:1 150 - 1 500 kg/m3
Service:On customer request - cutting, hole drilling, edge bevelling
Relief type:smooth
Surface finish:primer and final coat
Shades:as per the colour tables RAL, NCS (Consult shade suitability with the manufacturer)
Technical data sheet for download

Suitable for systems:

RAL and NCS colour card

Note: The colour card is for information only

Tloušťka desky
mm
CETRIS® FINISH, odstín A CETRIS® FINISH, odstín B
Kč / m2 Kč / m2
*nad 50m2 **do 50m2 *nad 50m2 **do 50m2
8 --------
10 --------
12 --------
14 --------
16 --------

* Uvedené ceny jsou platné při odběru min. množství 50m2 jednoho odstínu.

** Uvedené ceny jsou platné při odběru menším než 50m2 jednoho odstínu, pokud je tento odstín součástí zakázky o celkové výměře větší než 100 m2

Všechny uvedené ceny jsou bez DPH s odběrem ve výrobním závodě CETRIS Hranice. Dodací a platební podmínky se řídí Všeobecnými obchodními a dodacími podmínkami CIDEM Hranice, a. s. platnými pro rok 2024.

CETRIS® board properties

Cement bonded particleboards CETRIS® combine favourable features of cement and wood.

They are lighter than conventional cement-fibre boards, their strength and resistance against weather conditions, frost and mould ranks them higher than cement bonded chipboards or gypsum plasterboards.

    Composition of the board in weight percentage


  • 0%Wood chips
  • 0%Binder (cement)
  • 0%Water
  • 0%Hydration additives

CETRIS® boards are:

Fire resistant

CETRIS® cement-bonded particleboards without surface treatment are fire-resistant and their classification according to the reaction to fire class of the European standard EN... is A2... d0 non-flammable. CETRIS® cement-bonded particleboards with surface treatment are classified according to the reaction to fire class of the European standard EN.

Environment friendly

CETRIS® cement bonded particleboards are ecological and environment friendly. They contain no hazardous substances such as asbestos and formaldehyde and they are resistant to petrol and oils.

Frost-resistant

CETRIS® cement bonded particleboards are frost resistant, tested successfully by 100 freezing-defrosting cycles pursuant to ČSN EN 1328 standard.

Weather resistant

CETRIS® cement bonded particleboards is the best material for wet rooms and weather-exposed exteriors for its excellent humidity resistance.

Hygienic harmless

CETRIS® boards are hygienic harmless, odourless and contain no hazardous substances.

Perfect sound barrier

CETRIS® boards provide for acoustic insulation (sound transmission loss 30 – 35 dB).

Fungi and mould resistant

Moulds are not formed on the board surface thanks to the CETRIS® board resistance to humidity.

Insect resistant

CETRIS® cement bonded particleboards are absolutely insect resistant thanks to their cement content.

Services and surface finish

Cement bonded CETRIS® particleboards can be processed by all commonly available wood processing machines. The professional treatment of boards requires tungsten carbide tipped tools. The boards may be cut, drilled, milled and grinded. The boards may be attached to structures by screwing, or riveting. Alternatively, CETRIS® board may be attached to a load-bearing structure by gluing or with clamps. Both methods are used, in particular, to attach boards in suspended vented facades - see Facade systems.

CETRIS® boards can be cut in lengthwise, lateral or crosswise direction according to the customer requirements. The boards are always cut from the basic production size of 3350x1250 mm using special equipment. Minimum possible dimensions of cut rectangular sizes are 50x50 mm. Maximum possible dimensions of cut rectangular sizes are 1225x3325 mm.

The boards can be delivered delivered with drilled holes, including countersinks, based on the drill plan submitted by the customer.

Full-size machine sanding is performed in the context of manufacture of floor boards CETRIS® PDB for the reason of reduction of thickness tolerance to +- 0.3 mm.

On customer's request we provide side edge of CETRIS® cement bonded particleboards with milling of semi-tongue, groove and tongue or chamfered edge.

Application of surface finish on CETRIS® cement bonded particleboards must respect principles laid down in the relevant technical and assembly procedures. For recommended materials and principles of application please visit here.

Detailed information:


can be downloaded in PDF format.

Download information

Regulation for surface finish applications:

Download information

Packaging, storage, handling and parameters of dispatched CETRIS boards®

CETRIS® cement bonded particleboards are placed on wooden transport pallets for forklift handling. The boards are fixed to the platform using a banding in a crosswise manner; longitudinal banding is possible upon the customer's request.

The boards are protected against weather conditions with a PE foil packaging. This packaging type does not meet conditions for long-term weather exposure by open-air storage.
CETRIS® cement bonded particleboards should be stored in roofed, dry space to prevent moisture absorption by the boards before installation in the building structure. 

When storing boards without surface finish pallets of the same size can be stacked. Pallets with boards with surface finish cannot be stacked.

CETRIS® boards should be placed on a pallet for handling. If stored differently the boards should be handled vertically. Also manual transport should be carried out with the boards in vertical position.

Detailed information:

can be downloaded in PDF format.

Download information

Board dealers

Looking for our boards? Not knowing where to buy them? Find the nearest dealer.

Information and training courses

Needing more information about our boards? Try our training course or call us.